Fabricator 180

Enhanced Magnetics. Providing a smooth and stable arc characteristic. Unbeatable performance from 22 gauge to 5/16" (7.9mm) thick in a single pass.

Simple Operation. Just refer to our comprehensive weld set up guide for optimum welding performance over a wide range of materials and shielding gases.

Higher Output. The Fabricator 180 punches out 180 amp maximum output.

Quick Change Polarity. Simple, quick change (no tools required) polarity from within the wirefeed compartment.

2 lbs./10 lbs. Spool Capacity. Wire compartment design allows easy installation of 2 lbs., 10 lbs., 4" and 8" wire spool sizes.

Overload Protection. Shuts down the power source to protect the internal electrical components from overheating.

Heavy Duty Transformer. The transformer is built to last using premium quality 428F materials and fully dip varnished then baked for 4 hours.

Metal Feed Plate. The metal wire drive system features 2 roll drive system, quick change reversible drive rolls and easy-to-set single scaled wire tension knob.

Quick Disconnect Fitting. Allows for quick and easy out-of-box assembly, along with convenient cleaning of the torch and replacement of liner.

ISO 9001 Quality System. The certified quality management system guarantees the manufacture and distribution processes of this product.

Brilliant Characteristics. Extremely smooth arc and negligible spatter using a wide range of gases, materials and material thicknesses.

New Gun. 10ft. quality WeldSkill MIG gun.

Regulator. Comes with a regulator / flowgauge.




Accessories:
Buy
Price
Stock No.
Description
Image
$108.00 W4011500 Small Cart, supports a 7" cylinder.
$360.00 W4011100 Spool Gun,19ft, 180A, Fab140/180




Machine Specifications

Welding DC
Maximum Output 180 Amps
Output at 20% Duty Cylce @ 104oF 130 Amps at 20.5V
Current Range 30-180 Amps
Number of Voltage Settings 6
Welding Voltage Range 16 - 20 Volt
Wire Feed Speed 80 - 700 IPM
(2-18m/min)
Maximum Plate Thickness 5/16" (7.9mm)
Wire Diameter Range
Mild Steel: .023" - .035" (0.6 - 0.9mm)
Stainless Steel: .023" - .035" (0.6 - 0.9mm)
Aluminum: .030" - .035" (0.8 - 0.9mm)
Flux Cored: .030" - .045" (0.8 - 1.2mm)
Fitted Feedroll Suits MIG Wire .023" - .030"/.035"
(0.6 - 0.8/0.9mm)
Warranty Period 5 Years
Approvals CSA
IEC 60974-1 (CE)
Primary Power
Primary Voltage 230 Volts
Supply Plug NEMA 6-50P
Rated kVA @ 180 Amp 5kVA
Lead cord length 6ft (1.8m)
Rated Input Current 21 Amp




MIG Guns
Gun Length 10ft. (3m)
Part Number W4011400
Nozzle Part No: 21-50
Size: 1/2" (12.7mm)
Contact Tip Part No: 11-23
Size: .023" (0.6mm)
Diffuser Part No: 51
Liner Part No: 42-3035-15
Size: .030" - .035" (0.8-0.9mm)


Buy Price Item Part # Description
$12.50 1 21-50 Nozzle
$3.50 2 11-30 Contact Tip .030, Pkg of 5
$5.00 3 51 Gas Diffuser
$17.00 4 W7004068 Conductor Tube
$4.16 5 W7004070 Trigger
$14.56 6 W7004069 Handle Assembly
Contact Tips
$3.50   11-23 Contact Tip .023, Pkg of 5
$3.50   11-30 Contact Tip .030, Pkg of 5
$3.50   11-35 Contact Tip .035, Pkg of 5
$3.50   11-40 Contact Tip .040, Pkg of 5
$3.50   11-45 Contact Tip .045, Pkg of 5
Nozzles
$12.50   21-37 Nozzle, 3/8"
$12.50   21-50 Nozzle, 1/2"
$12.50   21-62 Nozzle, 5/8"
Conduits
$17.50   422315 .023 Conduit, 15ft.
$17.50   42303515 .030-.035 Conduit, 15ft.
$17.50   42404515 .040-.045 Conduit, 15ft.
$35.94   42N354515 .035-3/64" Teflon Conduit, 15ft.
Used with Aluminum Wire.
Drive Rolls
$17.20   7977036 Drive Roll, V Grooved For Hard Wire
.023" - .030"-.035", (0.6-0.8/0.9mm)
$18.20   7977660 Drive Roll, V Grooved For Hard Wire
.035" - .045", (0.9-1.2mm)
$17.21   7977731 Drive Roll, U Grooved For Soft Wire
.030" - .035", (0.8-0.9mm)
$18.21   7977264 Drive Roll, U Grooved For Soft Wire
.040" - .045", (1.0-1.2mm)
$17.21   7977732 Drive Roll, V Grooved Knurl For Cored Wires
.030" - .035", (0.8-0.9mm)
$18.21   704277 Drive Roll, V Grooved Knurl For Cored Wires
.045" - 1/16", (1.2-1.6mm)





Fabricator 180

Buy Price Part # Description
$1090.00 W1002600 Fabricator 180, 230V, 1 ph
$1150.00 W1002601 Fabricator 180 w/ Cart, 230V, 1 ph
$1,350.00 W1002602 Fabricator 180, w/ Spool Gun, 230V, 1 ph
$1,425.00 W1002603 Fabricator 180, w/ Cart, w/ Spool Gun, 230V, 1 ph





On orders over $200.00.
Contiguous U.S., Standard Ground Shipping
Prices subject to change
Some products not kept in stock
Last update 29 April 2013