Fabricator 140

POWER, PERFORMANCE, FEATURES & RELIABILITY

Enhanced Magnetics! Providing a smooth and stable arc characteristic. Unbeatable performance from 22 gauge to 3/16" (4.8mm) thick in a single pass.

Simple Operations! Just refer to our comprehensive weld set up guide for optimum welding performance over a wide range of materials and shielding gases.

Higher Output! The Fabricator 140 punches out 140 amp maximum output.

Quick Change Polarity! Simple quick change (no tools required) polarity from within the wirefeed compartment. 2 lb/10lb Spool Capacity! Wire compartment design allows easy installation of 2lb, 10lb, 4" and 8" wire spool sizes.

Overload Protection! Shuts down the power source to protect the internal electrical compenents from overheating.

Heavy Duty Transformer! The transformer is built to last using premium quality 428 degree F materials and fully dip varnished then baked for 4 hours.

Metal Feed Plate! The metal wire drive system features 2 roll drive system, quick change reversible drive rolls and easy-to-set single scaled wire tension knob.

Quick Disconnect Fitting! Allows for quick and easy out-of-box assembly, along with convenient cleaning of the torch and replacement of liner.

ISO 9001 Quality System! The certified quality management system guarantees the manufacture and distribution processes of this product.

Brilliant Characteristics! Extremely smooth arc and negligible spatter using a wide range of gases, materials and material thicknesses.

New Gun! 10ft. quality WeldSkill MIG gun.

Regulator! Comes with a regulator / flowgauge.


Accessories:
Buy
Price
Stock No.
Description
Image
$92.38 W4011500 Small Cart, supports a 7" cylinder.
$312.00 W4011100 Spool Gun,19ft, 180A, Fab140/180



Machine Specifications

Welding DC
Maximum Output 140 Amps
Output at 20% Duty Cylce @ 104oF 90 Amps at 18.5V
Current Range 30-140 Amps
Number of Voltage Settings 4
Welding Voltage Range 16.3 - 20 Volt
Wire Feed Speed 80 - 700 IPM
(2-18m/min)
Maximum Plate Thickness 3/16" (4.8mm)
Wire Diameter Range
Mild Steel: .023" - .035" (0.6 - 0.9mm)
Stainless Steel: .023" - .035" (0.6 - 0.9mm)
Aluminum: .030" - .035" (0.8 - 0.9mm)
Flux Cored: .030" - .045" (0.8 - 1.2mm)
Fitted Feedroll Suits MIG Wire .023" - .030"/.035"
(0.6 - 0.8/0.9mm)
Warranty Period 5 Years
Approvals CSA
IEC 60974-1 (CE)
Primary Power
Primary Voltage 120 Volts
Supply Plug NEMA 5-15P
Rated kVA @ 90 Amp 2.8kVA
Lead cord length 6ft (1.8m)
Rated Input Current 24 Amp




MIG Guns
Gun Length 10ft. (3m)
Part Number W4011400
Nozzle Part No: 21-50
Size: 1/2" (12.7mm)
Contact Tip Part No: 11-23
Size: .023" (0.6mm)
Diffuser Part No: 51
Liner Part No: 42-3035-15
Size: .030" - .035"
         (0.8-0.9mm)


Buy Price Item Part # Description
$12.50 1 21-50 Nozzle
$3.50 2 11-30 Contact Tip .030, Pkg of 5
$5.00 3 51 Gas Diffuser
$17.00 4 W7004068 Conductor Tube
$4.16 5 W7004070 Trigger
$14.56 6 W7004069 Handle Assembly
Contact Tips
$3.50   11-23 Contact Tip .023, Pkg of 5
$3.50   11-30 Contact Tip .030, Pkg of 5
$3.50   11-35 Contact Tip .035, Pkg of 5
$3.50   11-40 Contact Tip .040, Pkg of 5
$3.50   11-45 Contact Tip .045, Pkg of 5
Nozzles
$12.50   21-37 Nozzle, 3/8"
$12.50   21-50 Nozzle, 1/2"
$12.50   21-62 Nozzle, 5/8"
Conduits
$17.50   422315 .023 Conduit, 15ft.
$17.50   42303515 .030-.035 Conduit, 15ft.
$18.50   42404515 .040-.045 Conduit, 15ft.
$35.94   42N354515 .035-3/64" Teflon Conduit, 15ft.
Used with Aluminum Wire.
Drive Rolls
$17.20   7977036 Drive Roll, V Grooved For Hard Wire
.023" - .030"-.035", (0.6-0.8/0.9mm)
$18.20   7977660 Drive Roll, V Grooved For Hard Wire
.035" - .045", (0.9-1.2mm)
$17.21   7977731 Drive Roll, U Grooved For Soft Wire
.030" - .035", (0.8-0.9mm)
$18.21   7977264 Drive Roll, U Grooved For Soft Wire
.040" - .045", (1.0-1.2mm)
$17.21   7977732 Drive Roll, V Grooved Knurl For Cored Wires
.030" - .035", (0.8-0.9mm)
$18.21   704277 Drive Roll, V Grooved Knurl For Cored Wires
.045" - 1/16", (1.2-1.6mm)




Fabricator 140

Buy Price Part # Description
$760.00 W1002500 Fabricator 140 115V, 1 ph
$823.00 W1002501 Fabricator 140 115V, 1 ph, w/ cart
$1016.00 W1002502 Fabricator 140 115V, 1 ph, w/ spoolgun
$1,076.00 W1002503 Fabricator 140 115V, 1 ph, w/ spoolgun and cart





On orders over $200.00.
CONUS, Standard Ground Shipping
Prices subject to change
Some products not kept in stock
Last update 16 July 2010