Smith Heating Tips


Heating Tips
Used in Welding Handles

Smith's multi-flame and single flame heating tips are designed to provide large volumes of heat for applications such as: heat treating, priming, bending straightening, pre-heating, brazing, shrinking, farming and many others.  Heating tips provide significant cost savings in many applications.  By providing great amounts of quick, concentrated heat, heating tips do the job faster and cut labor time to a minimum.  For proper performance, use the recommended pressures for each tip and wit an adequate gas supply.  Manifolding of cylinders is essential for safe and efficient operation of large size heating tips.

Acetylene multi-flame heating tips are designed to provide large volumes of concentrated heat for bending, straightening shrinking, forming and many other applications.  Smaller sizes are often used for bronze welding or for applying hard facing metal to large areas.

WARNING!
MANIFOLDING CYLINDERS: When required flows ( cubic feet per hour - SCFH ) exceed the recommended withdrawal rate from one cylinder then additional cylinders must be manifolded to provide safe and efficient operation.  Acetylene must not be withdrawn at more than 1/7 of the cylinder capacity ( 47 SCFH for a 330 cu.ft. cylinder ).  Consult your gas supplier for manifolding instructions for the gases and cylinders supplied to you.

USED IN: Torch Handles - WH200, SW1A & SW1B.
NOTE: Oxy-Acetylene tips may also be used with oxygen / hydrogen.


Model ST6 Series

ST6xx Heavy Duty / Oxy-Acetylene Heating Tips
CAUTION: Heating tips must be used in conjunction with high flow flashback arrestors.  It may be necessary to increase outlet pressures to compensate for flow restrictions that may be created by flashback arrestors.
Buy
Price
Stock No.
No. of
Flames
Drill Size
Pressure ( PSIG )
Consumption SCFH
Average
BTU
Fuel Cylinders
Required
Overall Length
Inches / mm
Oxy
Fuel Gas
Oxy
Fuel Gas
$98.00
 ST603
6
#56
15
15
35
50
71,750
2
16" / 406
$103.00
 ST605
12
#57
15
15
96
87
124,670
2
19" / 483
$108.00
 ST610
12
#54
15
15
150
136
194,890
3
19" / 483


***************************************************************

Model MT6 Series

MT6xx Medium Duty / Oxy-Acetylene Heating Tips
Versatile multi-flame heating tips for the popular medium duty torch handles.  Used for general heating of metals, brazing, hard surfacing, etc.  Heads are manufactured from solid copper.
CAUTION: Heating tips must be used in conjunction with high flow flashback arrestors.  It may be necessary to increase outlet pressures to compensate for flow restrictions that may be created by flashback arrestors.
Buy
Price
Stock No.
No. of
Flames
Drill Size
Pressure ( PSIG )
Consumption SCFH
Average
BTU
Fuel Cylinders
Required
Overall Length
Inches / mm
Oxy
Fuel Gas
Oxy
Fuel Gas
$75.00
 MT603
6
#64
10
15
31
28
40,125
1
10" / 254
$89.00
 MT605
6
#56
10
15
57
51
73,085
2
16" / 406
$95.00
 MT610
12
#57
10
15
100
90
128,970
2
18" / 457
NOTE: Tips may also be used with oxygen / hydrogen.

***************************************************************

Model JX16

JX16 - Heavy Duty Aluminum Extrusion Cutting Tip Acetylene
JX16 Aluminum Extrusion Cutting Tip for use with Propane or Natural Gas.  Used to "cut" aluminum extrusions - acutally melts the aluminum rather than cutting it as a standard tip cuts steel for a straight edge cut.  The JX16 is perfect for use in aluminum extrusion mills and in any other situation where similar cuts are needed.  Can also be used as a heating tip.  May also be used to texturize stone / brick.  Uses LP Gas or Natural Gas with Oxygen.  The head of the JX16 contains 42 orifices, drill size #60. .
USE IN: Torch Handle - SW1B & WH200

Buy
Price
Stock No.
Pressures - PSIG @ Reg.
Consumption - SCFH
Heat Output
BTU / Hour
Nat. Gas
Oxy
Propane
Oxy
Fuel
Oxy
Propane
Nat. Gas
$490.00
JX16
25
80"
25
60"
128
502"
297,000
13,000



***************************************************************

Model ST6 Series

ST6xx Heavy Duty / Oxy-LP Heating Tip
Medium pressure oxy-propane or propane based heating tips provide high heating performance with low cost fuel gases including natural gas and propane based gases.
WARNING!
MANIFOLDING CYLINDERS
FOR CONTINUOUS OPERATIONS:
We recommend the manifolding of 3 LP-Gas cylinders for the ST625 and 6 for the ST635 tip or one 500 lb cylinder; also, 2 oxygen cylinders.  Recommendation is based on maximum withdrawal rate of 46 CFH from a 100 lb propane tank ( 1/3 full ) at 60oF.

USED IN: Torch Handles - WH200 & SW1B.
NOTE: ST635 require 3/8" I.D. ( 10mm ) hose and HB1522B-510 propane cylinder regulator.
CAUTION: Heating tips must be used in conjunction with high flow flashback arrestors.  It may be necessary to increase outlet pressures to compensate for flow restrictions that may be created by flashback arrestors.


Buy
Price
Stock No.
No. of
Flames
Uses
Pressures ( PSIG )
Consumption SCFH
Average
BTU
Fuel
Cyl.
Rqr'd
Overall
Length
Head
PN
Oxy
Fuel Gas
Oxy
Fuel Gas
$160.00
ST615
Fluted
Propane
23-65
10-28
225-535
70-160
244,000
1-2
20-1-2"
( 521mm )
1495
Natural Gas
18-55
10-28
175-450
96-267
155,145
Propylene
20-60
10-28
235-430
100-160
280,000
$238.00
ST625
Fluted
Propane
50-110
17-28
480-1000
140-280
455,000
3
31-1-2"
( 800mm )
1504
Natural Gas
43-80
18-28
390-785
200-450
313,950
$293.00
ST635
Fluted
Propane
70-115
18-40
670-1580
185-480
614,195
6
31-1-2"
( 800mm )
1499



***************************************************************

Model ST628

Head and Mixer Assemblies
Custom built heating tips for maximum versatility in heating operations.  Make any length heating tip.   All that is required is to add the desired length of pipe ( with 1/4" NPT pipe thread on either end ) and attach to the heating assemblies.  Pipe is not supplied.
Head and Mixer Assembly Only.

Buy
Price
Stock
No.
No. of
Flames
Pressure ( PSIG )
Consumption SCFH
Average
BTU
Fuel
Cyl.
Reqr'd
Oxy
Fuel Gas
Oxy
Fuel Gas
$205.00
 ST628
Propane
50-110
17-28
480-1000
455,000
3
1504
Natural Gas
43-80
18-28
390-785
200-450



***************************************************************

Model MT615 & MT815

MT615 & MT815 Medium Duty / Propane, Natural Gas
Multi-flame heating tip used with propane, propane based fuels and natural gas.
USED IN: Torch Handles - WH100 & MW5A.

Buy
Price
Stock
No.
No. of
Flames
Uses
Pressures ( PSIG )
Consumption SCFH
Average
BTU
Fuel
Cyl.
Reqr'd
Overall
Length
Head
PN
Oxy
Fuel Gas
Oxy
Fuel Gas
$145.00
 MT615
Fluted
Propane
20-60
10-25
225-535
70-160
286,350
2
19"
( 483mm )
1495
Natural Gas
15-50
10-25
175-450
96-267
181,500



***************************************************************

Model ST815 & ST825

ST815, ST825 Heavy Duty / Oxy-MAPP, Propylene
ST815 - Medium capacity tip: Use in WH200 & SW1B handles.
ST825 - High capacity heating tip: Use in WH200 & SW1B handles with 3/8" ( 10mm ) I.D.hoses.

Buy
Price
Stock
No.
No. of
Flames
Uses
Pressures ( PSIG )
Consumption SCFH
Average
BTU
Fuel
Cyl.
Reqr'd
Overall
Length
Oxy
Fuel Gas
Oxy
Fuel Gas
$169.00
 ST815
Fluted
MAPP
40-70
15-35
395-655
125-230
421,000
1-2
20-1/2"
( 521mm )
Propylene
37-77
13-37
390-655
120-235
415,000
$250.00
 ST825
Fluted
MAPP
60-110
22-35
590-1500
200-528
865,000
2-4
31"
( 787mm )



***************************************************************

Model MT615, MT810 & MT815

MT615, MT810 & MT815 Medium Duty / Oxy-MAPP, Propylene
Medium capacity tip: Use ihn WH100 & MW5A torch handle.
USED IN: Torch Handles - AW1A & AW10A.

Buy
Price
Stock
No.
No. of
Flames
Uses
Pressures ( PSIG )
Consumption SCFH
Average
BTU
Fuel
Cyl.
Reqr'd
Overall
Length
Oxy
Fuel Gas
Oxy
Fuel Gas
$145.00
 MT615
Fluted
Propylene
20-60
10-25
235-430
100-160
280,000
 
19"
( 483mm )
$109.00
 MT810
12
MAPP
40-70
10-17
125-155
46-55
121,500
1
18"
( 457mm )
Propylene
10-22
10-20
120-160
42-58
115,000
 

CAUTION: Heating tips must be used in conjunction with high flow flashback arrestors.  It may be necessory to increase to increase outlet pressures to compensate for flow restrictions that may be created by flashback arrestors.




On Orders Over $175.00, U.S Orders Only

Last update 15 May 2008